RMA's
P o w e r P l a n t
s O n l i n e
TM

Power Plant Parts and
Components
Return
to Power Plant Index
Listed 3/28/10
43MW Generator. This is the generator ( only) with no gas turbine.
It was purchase in 1970 and never used.
Manufactured in the US by EM, it is rated as follows: 50,500kVA, 42,925kW, 60Hz., 3600rpm, 13.8kVolts, 3 phase, .85PF.
(Click here for images
1
2 )
Call for price.
Contact Milt Fyre 503-351-9898 or
milt@rmaglobal.com
Listed 11/11/09
Westinghouse Surface Condenser for sale. 5000 sq ft Westinghouse
surface condenser, Divided head, 2 pass, 0.625 "
I.D., 18 BWG tubes, 1416 tubes, tube length 18ft, For
steam turbine generator application. (Click
here for image.) Call for price. Contact Milt Fyre 503-351-9898 or
milt@rmaglobal.com
Listed 10/20/09
1434kW Generator Ends for sale: Two Kato 1434KW, 1800RPM, 4160 volt, 60 hertz generator ends
with skid removed from a gas turbine. Price
$50,000 for the pair f.o.b. New
Jersey. Less than 1000 hours
(Click here for images.) Contact Milt Fyre 503-351-9898 or
milt@rmaglobal.com
Listed 12/15/08
Frame 6 Display Unit For Sale.
Used in Frame 6 Gas Turbine Generator Model MS6001 (Click
here for part numbers and images.) Contact for price. Contact Milt Fyre
503-595-5418 or
milt@rmaglobal.com
Listed 12/15/08
Speedtronic Mark II Cards for Sale Many New and Used Cards, and a
SPEETRONIC CALIBRATOR for sale (Click
here for part numbers and images.) Contact for price. Contact Milt Fyre
503-595-5418 or
milt@rmaglobal.com
Listed 11/25/08
20MVA GE Transformer 60Hz. For
Sale General Electric Transformer, Voltage Rating 67,00GRV /
38,680kV - 12,470kV Impedance Volts 7.8% 7000 GRV - 12,470 Volts @
12,000KVA. Tap Changer is Bad Needs Repair. Model:
OA/FA/FOA-T-60-12/16/22.4-67000GRY/38680-12470 Serial Number:
F-961407, Year Built: 1969. Year taken out of service:
2006 Total Weight 91,500 lbs. (Click
here for image.) Contact for price. Contact Milt Fyre
503-595-5418 or
milt@rmaglobal.com
Listed 2/9/08
192MVA Westinghouse Generator for sale. (This is
a generator only.) Nominal Power : 192MVA,
Generation Voltage : 13.8kV, Power Factor :
0.85, Nominal Current 8,032A, Rated Speed : 3600
rpm, Frequency : 60Hz., 3 Phase, Hydrogen
Cooled 45psig. Less than 2,000 total hours. Like new
condition. (Click
here for image.) Contact for price.
Contact Milt Fyre
503-595-5418 or
milt@rmaglobal.com
Listed 11/2/07
100kVA Overhead Distribution Transformer (ABB) (7 units for
sale): SP- Surge Protecting No Load: 154 Watts at 85 degrees C;
Load: 803 Watts at 85 degrees C; Total Loss: 957 Watts 7200/12470Y x
14400/24940Y HV; 125* 125 BIL; Copper HV Winding
Material, 120/240 LV; 30* 30 BIL; Non-LV Interlaced; Aluminum LV Winding
Material, 60Hz. 1 Phase Transformer Weight;
1211.24 lbs.; Height 53 in.; Width 32in.; Depth33.00 in. 65 Temp
Rise; 1 DV Switch, ABB, External (lever) Handle, 1 Deck, PLT 7.2 x
14 2 HV expulsion fuse: 15kV; 18E wire; curve #7 1
HV Line Bushing, 125kV BIL, 17.75" Creep, 8-2 size eyebolt, scre
1 HV Neut Bushing, 125kV BIL, 17.75" Creep, 8-2 size eyebolt, scre
3 LV Bushings, Double Eye Bolt for 2/0-1000MCM, Porcelain 46
Gal(s) of Transformer Oil 1 Oil Drain, Pipe plug .50, bronze hex
head 1 Arrestor; 19kv Lrg Blk Mov Polymer
(5151B44G01) Asking
$4,000 each.
Pete Hoffman 503-595-5418 pete@rmaglobal.com
Listed
10/2/07
Transformers for sale: Pad Mounted Distribution
Transformers (oil filled), single phase, never used, 60Hz., for sale as a
lot (173 units). Pad Mounted (Oil Filled) Single 10kVA
15kVA 25kVA 37.5kVA 50kVA
75kVA 100kVA 167kVA All 7200/12470Y primary and
120/240 secondary. (Click
here for list) contact Pete Hoffman 503-595-5418 pete@rmaglobal.com
Listed 9/19/07
Sootblowers:
Suitable for Wood/coal/biomass boilers (10MW to 25MW). The blowing
medium is steam.
5 each - Clyde Bergemann Sootblowers - Model: RKT 7' 8 ½" (7' 8 ½"
is the length of the blowing lance) W-275-SB-1022
Fully retractable unit. 3 each - Clyde Bergemann
Sootblowers - Model: RKS 17' 7 ½" (17' 7 ½" is the length of the
blowing lance). New never been used - just a little weathered from
being outside. (Click
here for images.) New
Price at Factory: $20,000 each. Asking $6,000 each.
Contact Milt Fyre
503-595-5418 or
milt@rmaglobal.com
Listed 11/15/06
GE
Frame 7 Gas Turbine Generator Combustion Parts. (click
here for details) Contact Milt Fyre
503-595-5418 or
milt@rmaglobal.com
Listed 12/1/05
115kV Pascor
disconnect switches
for sale (4 each). CBPC 115/1200/550/61. 3-pole single
throw. Center side break with copper live parts. Rated 115KV (121KV max) 1200
amp continuous, 550KV BIL, 61kA momentary, 60Hz. 12'-0" phase spacing.
Centerline-centerline. Weight 400 lbs. Include worm gear operator, arcing horns,
operating mechanism for phase over phase, Underhung mounting on a transmission
tower NGK-Locke TR-286 insulators with "semi-con (resistance) glaze,
shipped assembled with switch. ANSI gray color.
$10,000 each. Contact Milt Fyre
503-595-5418 or
milt@rmaglobal.com
Listed 8/15/05
GE Frame 5 & 6 Gas Turbine Parts for Sale,
Frame 6B 1st & 2nd Stage Buckets & Shrouds.
Frame 5 2nd Stage Buckets.
(Click here for more information)
Contact Milt Fyre 503-595-5418 or
milt@rmaglobal.com
Listed 2/25/05
Frame 5 and LM2500 Parts for sale:
First stage buckets, 733E0831P105, $ 21,780 per set. Two sets are
available.
First stage shrouds, 722C0163P003/004, $ 3,300.00 per set. Two sets are
available.
First stage shrouds, 339A9970G004, $ 7,700.00 per set. One set is available.
One LM 2500 P# 9101M29G77 Combustor in overhauled condition. $104,500.00.
Overhauled by Chromalloy. Contact Milt Fyre 503-595-5418 or milt@rmaglobal.com
Listed 2/24/05
Power Poles 75' to 95' (metal) for
sale. We have 26 Valmont Power poles (new) for sale for a fraction of
their original cost and we will consider all reasonable offers.
VALMONT POWER POLES:
90' AGH, Class 32, SVD-3STR2, A9771 power poles
80' AGH, Class 32, SVD-3STR3, A9771 power poles
75' AGH, Class 12, VIP STR5, A9771 power poles
80' AGH, Class 12, VIP STR7, A9771 power poles
80' AGH, Class 20, SVS-3 STR9, A9771 power poles
95' AGH, Class 32, SVD-3 STR10, A9771 power poles
95' AGH, Class 24, VISL STR11, A9771 power poles
We have more in stock. We can provide Power Pole Specifications (PDF file)
on request Contact Milt Fyre 503-595-5418 or milt@rmaglobal.com
Listed 12/08/04
GE Speedtronic MK11 parts for sale. New and used.
(Click
here for more information.) Contact
Milt Fyre 503-595-5418 or milt@rmaglobal.com
Listed 6/25/2004
Remote Fuel Coolers, Model AO-40 manufactured by Thermal Transfer Products.
Originally used with CAT 3516B, 2000 kW diesel generators. Engines had less than
20 hours of run time. Includes ½ HP single phase fan
motor. Priced at $495. 10 available.
Fiberglass Battery Boxes for (2) Size 4D diesel engine starting
batteries. Color is gray. Exterior dimensions:
49.5”L x 12.75”W x 16”H.
Priced at $175
each. 35 available.
Spring Isolators - Seismic Rated Caldyn Model RJSD-3920K with earthquake
restraints. Originally used with
CAT 3516B, 2000 kW diesel generators. Engines had less than 20
hours of run time. Base is 10”L x 9”W with 5½”
operating height. Isolators are primer
painted only, stored indoors. $85
each. Contact
Pete Hoffman 503-595-5418 or pete@rmaglobal.com
Listed 6/24/2004
Engine Silencer - Hospital Grade Diesel Engine Silencer (18” Side Inlet, 18” End Outlet).
Silencer is EM Products Model JHS-18X-205414, manufactured in 10/00. Originally used with
Cummins DQKC, 2000 kW generator set with 17 hours of run time.
Includes 90º exhaust elbow and rain cap. This silencer is currently stored inside.
Dimensions: 48” diameter x 20’ overall length including exhaust
elbow. Priced at $1,800 each.
Only one available. Contact Pete
Hoffman at 503-595-5418 or
pete@rmaglobal.com
Listed 6/24/2004
Exhaust Silencers - Super critical, low profile dual inlet (pancake style) exhaust silencers.
Silencers are Harco Manufacturing Co. Model 9628SFH 12x12x20 with (2) 12” flanged inlets and a 20” flanged outlet.
Originally used with
CAT 3516B, 2000 kW diesel generators. Engines had less than 20
hours of run time. Silencers have been in inside storage. Dimensions: 96”
diameter x 28” body height. 12 available. Price is
$2600 each.
Click
here for manufacturers documentation in pdf. Contact Pete
503-595-5418 or
pete@rmaglobal.com
Listed 10/09/2003
Two-Deltak 2 Drum HRSGs for LM6000s $1.9mm
each. 650-950 Psig sliding, + 40 psig; includes supp fire.
Contact Lane Kadel 503-595-5418 or lane@rmaglobal.com
Listed 10/09/2003
One-Deltak 2 Drum HRSG for GE 7EA
650-950 Psig sliding, + 40 psig; includes supp fire
Price $3.7mm
Contact Lane Kadel 503-595-5418 or lane@rmaglobal.com
Listed 03/27/03
GE MKII Control system for LM2500. Available in early May,
2003. Call for pricing. Contact
Milt Fyre 503-595-5418 or milt@rmaglobal.com.
Listed 02/21/03
Frame 5LA parts. Various GE 5001LA gas turbine parts. Click
here for complete list. Call for pricing. Contact Lane Kadel
503-595-5418 or lane@rmaglobal.com.
Listed 01/02/03
3 EMC Symmetrix (Sym 5's) units for sale:
System 8730 (3 bay): $125,000,
System 8430 (1 bay): $50,000, and System 3830 (1
bay): $25,000. The 8730 and the 8430
are new and were never installed. Software in sealed boxes. Units
are certified. For more details on each, click
here. Contact Lane Kadel at 503-595-5418 or lane@rmaglobal.com.
Listed
12/31/02
*Sale* Equipment from Cutler-Hammer, Marconi, Astec, Industrial
Electronics, and many more! For a complete list, click
here. Contact Randy Klohmann at Hackney Power 317-844-1730 or randykloh@hotmail.com.
Listed 12/04/02
Power
Rectifier - Dynatrol Power Unit Model # SR92-01010503-GKLX-69XX (serial no.
950176) was made in 1995 by the Vermont based company, Dyna Power, and
the grey Switch Gear/Breaker units were manufactured by Hyden Switchgear
Products Corp. out of Buffalo, NY and sold by IEM out of Fremont, CA. The
Dynatrol unit was used for a short period approximately six months and was then
shut down in 1996 never to be used again. The following is from the front
sheet of the Dynatrol Power unit's operating manual:
AC input 12,470 Volts 3 PH 60 HZ 281 AMPS 6067 KVA
DC output 100 Volts 50,000 AMPS 5000 KW 3.4% RIPPLE
(Click
here for pictures) (Click
here for diagrams) $255,000 Contact Lane Kadel at
503-595-5418 or lane@rmaglobal.com
Listed
11/10/02
High/medium voltage transformers. All have been tested and are certified
PCB free. About 20 available. For a sample list, click here. Make
offer. Contact Lane Kadel 503-595-5418 or lane@rmaglobal.com.
Listed 11/14/02
LM6000 Simple Cycle
Balance of plant equipment (new) for 4 LM6000s. 2 cooling towers, 1
5000-kVA Padmount Transformer, 6 gas compressors, 4 chillers, 2 SCRs, 1
emissions monitoring system, 2 air compressors, 8 Demin. Tanks, 245kV circuit
breakers, 230kV switch gear and insulators, 12,000 ft. 230kV underground cable,
5kV & 15kV switch gear
(The LM6000s available separately from other sources.)
(Click
here for more details) Contact Milt Fyre 503-595-5418 or milt@rmaglobal.com
Listed
8/20/02
New 2001 - Special sale of substation and power plant
equipment including Alcad battery backup system 97 & Siemens
115kv circuit breaker (Click
here for details) Contact Jim Michael @ Northwest Regional Power (509)
773-5650 or jmichael@rossmgt.com or Lane Kadel @
RMA (503) 595-5418 or lane@rmaglobal.com
Listed
02/25/02
Boiler - Model 2100C Raypack water tube boiler; Serial #
9704139272; Built 1997; Capacity 2,100,000 BTUs; Output 1,700,000 BTUs with
forced air flue and circulating pump. Used in Texas during the
winter of 1998, 1999 and 2000. Taken out of service in October of
2001. Contact Milt Fyre 503-595-5418 or milt@rmaglobal.com
Listed
02/25/02
Cooling Tower - Marley Aquatower; Serial # 76174-1/B22154A/4852;
Capacity 50 tons; installed March 1995, SH229-436; B22154A-4850;
TWR-EFF-3/31/95; Belt size 2 2/A120 Contact Milt Fyre 503-595-5418 or
milt@rmaglobal.com
Listed
01/28/02
1 (one) Trench
Dry Type Air Core Shunt Reactor. 66Kv/50hZ.
Click
Here For Details Price $150,000
Contact Lane Kadel 503-595-5418 or lane@rmaglobal.com
Listed
08/23/01
Two newly
rebuilt Dresser Rand reciprocating gas compressors; process
7800lb/hr. each of CPUC natural gas; compress from 150
psig to 300 psig. Complete, skid mounted
with motor (200 HP, 1800 RPM, 460/3Ph/60Hz), motor
starter (Class 1, Div 2), pulse dampeners, after
cooler, all instrumentation. Full warranty,
ready for immediate shipment. $420,000
for the pair but will split up for sale. Contact Milt Fyre
503-595-5418 or milt@rmaglobal.com
Listed
06/18/01 Sold - Sold
- Sold by RMA
Bio-Mass
Pellitizer!! One Lundell Model 1200 Densifying System.
This machine primarily intended for corrugated paper and
other types of paper products. It has been
successfully operated in other Bio-Mass
Plants. Includes
Shredder-Mixer, Densifier, and Carry-Away Cooling
Conveyor. Owner Must Sell. Worth about
$500,000, List Price is $50,000,
and owner will take all offers. Must
sell. Contact Lane Kadel at lane@rmaglobal.com
or 503-595-5418
Listed
05/21/01
Frame 7B Parts Available. Click
here for detailed list. Contact Milt Fyre at
milt@rmaglobal.com or 503-595-5418
Listed
01/10/01
GE Turbine Blades & Buckets.
Must sell. Purchased @ excellent price. GE
Part #818E0643 Qty 80 818B -FRAME 5-$85,000
OBO GE Part # 01J2202-H04 Qty 109-Frame 3- $60,000
OBO Contact Lane
Kadel for more info at: lane@rmaglobal.com
or 503-595-5418
Listed
8/21/00
Maine Yankee is offering Motor Control
Centers from the decommissioned Maine Yankee nuclear power
plant. This inventory is expected to sell
quickly. All are Westinghouse Type W or Type 5
Star, 480-120 vac, 60 Hz, 3 phase. (Click
here for details)
Contact Lewis R. Loon,
Phone: 207-882-4515, Fax: 207-882-5353, email:
loonlewi@myapc.com
Listed 4/5/00
Auxiliary
Boiler, Circulating Water Pumps, and 120/160 MVA transformer to used with 2 GE Frame 9E (50Hz.) Turbine
Generators. All units are new (1997) and
with manufacturers warranty. Stored in accordance with manufacturers recommendations. (Click here for more details).
Contact Milt Fyre 503-595-5418 or milt@rmaglobal.com
Listed
11/3/99
Niagara
Mohawk Transmission & Distribution hardware inventory sale. More than $1 million worth of
unused equipment.
Overhead transmission & distribution hardware substation hardware, street lighting
hardware underground transmission
and distribution hardware (click here)
THROTTLE VALVE
Westinghouse part no. 790D058-003; Steel body,
9-1/2" Dia. X 20"long, steam, oil-operated, for main turbine throttle
valve and servomotor. Contact Scott McCann at Entergy's Baxter Wilson
Plant in Vicksburg, MS at (601) 629-6261 or mccann@entergy.com
Return
to Power Plant Index

sales@rmaglobal.com
Phone: (503) 595-5418 FAX: (503) 635-0091
Copyright
1995-2010: RMA Inc.